Photo-grafting Poly(acrylic acid) onto Poly(lactic acid) Chains in Solution

Poly(lactic acid)(PLA)is one of the most important bio-plastics,and chemical modification of the already-polymerized poly(lactic acid)chains may enable optimization of its material properties and expand its application areas.In this study,we demonstrated that poly(lactic acid)can be readily dissolved in acrylic acid at room temperature,and acrylic acid can be graft-polymerized onto poly(lactic acid)chains in solution with the help of photoinitiator benzophenone under 254 nm ultraviolet(UV)irradiation.Similar photo-grafting polymerization of acrylic acid(PAA)has only been studied before in the surface modification of polymer films.The graft ratio could be controlled by various reaction parameters,including irradiation time,benzophenone content,and monomer/polymer ratios.This photo-grafting reaction resulted in high graft ratio(graft ratio PAA/PLA up to 180%)without formation of homopolymers of acrylic acid.When the PAA/PLA graft ratio was higher than 100%,the resulting PLA-g-PAA polymer was found dispersible in water.The pros and cons of the photo-grafting reaction were also discussed.     

Amphiphilic copolymers with poly(meth)acrylic acid chains “grafted from” caprolactone 2‐(methacryloyloxy)ethyl ester‐based backbone

Well‐defined amphiphilic graft copolymers containing hydrophilic poly((meth)acrylic acid) (PMAA) or poly(acrylic acid) (PAA) side chains with gradient and statistical distributions were synthesized. For this purpose, the hydroxy‐functionalized copolymers with various gradient degrees, in which 2‐(6‐hydroxyhexanoyloxy)ethyl (meth)acrylate units (caprolactone 2‐[methacryloyloxy]ethyl ester, CLMA) formed strong gradient with tert‐butyl acrylate (tBA), slight gradient copolymers with tert‐butyl (meth)acrylate (tBMA), and statistical copolymers with methyl (meth)acrylate (MMA) were modified to bromoester multifunctional macroinitiators, P(tBMA‐grad‐BrCLMA), P(BrCLMA‐grad‐tBA), and P(BrCLMA‐co‐MMA). In the next step, they were applied in controlled radical polymerization of tBMA and tBA yielding graft copolymers with various lengths of side chains as well as graft densities. Further, the tert‐butyl groups in copolymers were successfully removed via acidolysis in the presence of trifluoracetic acid, which caused transformation of the hydrophobic graft copolymers into amphiphilic ones with ability of self‐assembly for the future biomedical applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Structure and pH‐sensitive properties of poly (vinylidene fluoride) membrane changed by blending poly (acrylic acid) microgels

pH‐sensitive poly (vinylidene fluoride) (PVDF)/poly (acrylic acid) (PAA) microgels membranes are prepared by phase inversion of the N, N‐dimethylformamide solution containing PAA microgels and PVDF in aqueous solution. The composition and structure of the blend membrane are investigated by Fourier transform infrared spectra, X‐ray photoelectron spectroscopy measurements, thermo gravimetric analysis, field‐emission scanning electron microscope and atomic force microscope. The results indicate the surface and cross section of the blend membranes have a porous structure with PAA microgels immobilized inside the pore and on the membrane surface. The blend PVDF membranes exhibit pH‐sensitive water flux, with the most drastic change in permeability observed between pH 3.7 and 6.3. The blend membranes are fouled by bovine serum albumin, and their antifouling property is enhanced by increasing PAA microgels, mainly derived from the improved hydrophilic property. Copyright © 2013 John Wiley & Sons, Ltd.     

Compatibility Study of Blends of Acrylic Rubber (ACM), Poly(ethyleneterephalate) (PET), and Liquid Crystalline Polymer (LCP)

The ternary blends of acrylate rubber (ACM), poly(ethyleneterephalate) (PET), and liquid crystalline polymer (LCP) were prepared by varying the amount of LCP, but fixing the ratio of ACM and PET using melt mixing procedure. The compatibility behavior of these blends was investigated with infrared spectroscopy (IR), differential scanning calorimetry (DSC), and dynamic mechanical analyzer (DMA). The IR results revealed the significant interaction between the blend components. Glass transition temperature (T_g) and melting temperature (T_m) of the blends were affected depending on the LCP weight percent in the ACM/PET, respectively. This further suggests the strong interfacial interactions between the blend components. In the presence of ACM, the nucleating effect of LCP was more pronounced for the PET. The thermogravimetric (TGA) study shows the improved thermal stability of the blends.     

Thermo and pH Dual-Responsive Micelles of N-phthaloylchitosan-g-Poly(N-isopropylacrylamide) and Poly(acrylic acid-co-tert-butyl acrylate) for Drug Delivery

A novel amphiphilic copolymer N-phthaloylchitosan graft poly(N-isopropylacrylamide) and poly(acrylic acid-co-tert-butyl acrylate) (PHCS-g-PNIPAAm&P(AA-co-tBA)) was synthesized. The graft copolymer could form micelles in aqueous medium, and the critical micelle concentration (CMC) of the copolymer was 7.5 × 10^{? 3}mg/mL. The lower critical solution temperature (LCST) of the micelles was measured to be 30°C. Transmission electron microscopy (TEM) image showed that the micelles exhibited a regular spherical shape, and the mean diameter of the micelles was 94.1 ± 0.8 nm as determined by dynamic light scattering (DLS). The potential usefulness of the micelles as drug delivery systems was investigated using anti-inflammation drug prednisone acetate as the model. The drug loading capacity of the micelles was measured to be 22.86 wt%, and the DLS results showed that the mean diameter of the drug-loaded micelles was 133.3 ± 2.4 nm. In vitro drug release studies indicated that the micelles exhibited thermo and pH dual-responsive release profiles.     

Graft Copolymerization of Artemisia Seed Gum with Acrylic Acid under Microwave and its Water Absorbency

A super‐absorbent polymer was prepared by grafting copolymerization of acrylic acid onto Artemisia seed gum, using microwave irradiation and ammonium persulfate as an initiator. The effect of various preparation conditions on its water absorbency, such as the ratio of acrylic acid to Artemisia seed gum, degree of acrylic acid neutralization, amount of initiator and microwave irradiation time, was investigated by orthogonal tests. The optimal reaction conditions were 3 min (irradiation time), 70% neutralization degree of acrylic acid and 2% initiator on the basis of the mass of acrylic acid used. When the mass ratio of acrylic acid to Artemisia seed gum is 5:0.5, the product has a water absorbency close to 400 times at room temperature in distilled water, this indicated that is has a high water absorbency. The structure of the graft copolymer was confirmed by Fourier transform infrared spectrometer (FT‐IR) and thermogravimetric analysis (TGA). Further more, this microwave irradiation processing method to prepare water absorbent materials has no industrial cast off produced, that is to say, this method is environmentally friendly.     

Cellulose Filter Paper with Antibacterial Activity from Surface-Initiated ATRP

Poly(tert-butyl acrylate) (PtBA) bruhes were successfully grafted on the cellulose filter papers via surface-initiated atom transfer radical polymerization (ATRP). Then the grafting PtBA brushes were transferred into poly(acrylic acid) (PAA) in the presence of trifluoroactic acid (TFA), which can form chelate complexes with Ag⁺. The Ag⁺ was reduced in situ to obtain the silver nanoparticles decorated cellulose filter papers. Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) were used to characterize the chemical structure of the resulting product. The morphologies of the filter paper at different stages of surface modification were investigated by field emission scanning electron microscopy (FESEM). The silver nanoparticles decorated filter paper performed good antibacterial ability against E. coli as compared with the original filter paper and PAA modified filter paper.     

A pH-Sensitive Hydrogel with Hydrophobic Association for Controlled Release of Poorly Water-Soluble Drugs

A novel pH-sensitive hydrogel has been developed by UV induced radical polymerization of acrylic acid (AA) and amphiphilic macromonomer polyethylene glycol monolaurylether monoacrylate (PEGLA) with crosslinker ethylene glycol dimethacrylate for controlled release of acyclovir, a poor water-soluble model drug. The swelling behavior was investigated in the buffer of different pH at I = 0.1 M, as well as in the ethanol/water mixture. The hydrophobic association formed by the hydrocarbon chains in PEGLA was found to dominate the swelling properties of the hydrogels with subordinate pH sensitivity due to the ionization of the AA segments. Therefore, the drug loading of acyclovir has been improved and the release rate of acyclovir was slowed down with increasing the PEGLA content in the hydrogels. By fitting the release data with Weibull equation, the acyclovir release kinetics was changed from the Fickian diffusion to an anomalous diffusion when the PEGLA content in the hydrogels was beyond 20 mol%.     

Study on affecting factors of curing rate in ultraviolet curing adhesives containing modified acrylic ester prepolymers

Abstract

Ultraviolet (UV) curing adhesives have been extensively utilized in fields of health care and electronic components due to low energy consumption and solvent pollution. The most used system is modified acrylic ester system whose merits are low cost, high reliability and tensile strength. However, higher UV curing rate is still pursued especially in field of quick dry adhesives as well as influencing factors of curing rate are very complex. For clarifying affecting factors of curing rate as well as achieving higher curing rate, in this work, several UV curing adhesives with acrylic photosensitive resin prepolymers modified by epoxy and polyurethane were prepared. The impacts of class and content of radical photo-initiators, prepolymers and reactive diluents on UV curing rate were deeply researched. Moreover, the influence of oxygen polymerization inhibition on curing rate was discussed as well. The significantly elevated curing rates were obtained in as-prepared adhesives, in comparison with commercial ones. This work might offer a facile and effective strategy to obtain the promising high-performance modified acrylic ester prepolymer bearing UV curing adhesives with a significantly elevated high curing rate by well controlling these investigated affecting factors.